Fitter ITI: Basic Fitting Tools and Operations
8 minFull explanation, worked examples & memory tricks in the app
Kit Library / Engineering / Mechanical Fitting
⚡ Topic Learning KitFitter ITI
English 15 leveled MCQs Free
Shared by a Veda teacher · Generated with Veda AI
📖 Smart notes
1
What you'll study, topic by topic
❓ Leveled MCQ practice
Try the smart MCQs from this kit
All 15 questions, laddered from warm-up to topper-level, each with its answer and the reasoning behind it.
Warm-up · 10 questions
Q1. Which tool is used for holding and turning a drill bit?
Beginner
A
Drill chuck
B
Chisel
C
Vice
D
Hammer
Show the answer
A · Drill chuck
A drill chuck is a specialized clamp used to hold drill bits securely in a drilling machine.
Q2. What is the primary use of a vernier caliper in fitting?
Beginner
A
Drilling holes
B
Cutting metal sheets
C
Holding workpieces
D
Measuring internal and external dimensions
Show the answer
D · Measuring internal and external dimensions
A vernier caliper is a precision measuring instrument used to measure internal, external, and depth dimensions.
Q3. The process of making a hole in a metal piece using a rotating tool is called:
Beginner
A
Reaming
B
Drilling
C
Broaching
D
Tapping
Show the answer
B · Drilling
Drilling is the operation of creating a hole using a drill bit, which rotates and cuts into the material.
Q4. What is the purpose of a centre punch in fitting?
Beginner
A
To align two parts
B
To mark the center of a hole before drilling
C
To remove rivets
D
To punch holes in metal
Show the answer
B · To mark the center of a hole before drilling
A centre punch is used to create a small indentation at the center of a proposed hole to guide the drill bit.
Q5. Which of the following is a measuring tool?
Beginner
A
Hammer
B
Micrometer
C
Chisel
D
File
Show the answer
B · Micrometer
A micrometer is a precision measuring instrument, whereas the others are cutting or striking tools.
Q6. The tool used for tightening and loosening nuts and bolts is:
Beginner
A
Pliers
B
Screwdriver
C
Hacksaw
D
Spanner
Show the answer
D · Spanner
A spanner is specifically designed to grip and turn nuts and bolts.
Q7. Which tool is used for cutting metal by hand?
Beginner
A
Surface plate
B
Divider
C
Scriber
D
Hacksaw
Show the answer
D · Hacksaw
A hacksaw is a hand tool with a toothed blade used for cutting metal.
Q8. The process of smoothing a metal surface using a file is called:
Beginner
A
Filing
B
Scraping
C
Sawing
D
Chiseling
Show the answer
A · Filing
Filing is the operation of removing material and smoothing surfaces using a file.
Q9. Which tool is used to hold workpieces securely during fitting operations?
Beginner
A
Bench vice
B
Clamp
C
Tongs
D
Pliers
Show the answer
A · Bench vice
A bench vice is a common workholding device attached to a workbench for securing workpieces.
Q10. A micrometer is used to measure large distances greater than 1 meter.
Beginner
A
True
B
False
Show the answer
B · False
A micrometer is a precision instrument for small measurements, typically up to a few centimeters, not large distances.
Building up · 5 questions
Q11. Which file is used for removing a large amount of material quickly?
Intermediate
A
Smooth file
B
Diamond file
C
Needle file
D
Rough file
Show the answer
D · Rough file
A rough file has coarse teeth and is used for rapid material removal, while smooth files are for finishing.
Q12. Which tool is used to cut internal threads in a hole?
Intermediate
A
Tap
B
Reamer
C
Die
D
Chisel
Show the answer
A · Tap
A tap is used to cut internal threads, while a die is used for external threads.
Q13. What is the function of a scriber?
Intermediate
A
To measure angles
B
To scribe lines on metal
C
To hold workpieces
D
To cut threads
Show the answer
B · To scribe lines on metal
A scriber is a sharp-pointed tool used to mark or scribe lines on metal surfaces.
Q14. Which of the following is used to check the squareness of a machined surface?
Intermediate
A
Vernier caliper
B
Try square
C
Steel rule
D
Micrometer
Show the answer
B · Try square
A try square is a precision tool used to check right angles and squareness.
Q15. A die is used to cut external threads on a cylindrical rod.
Intermediate
A
True
B
False
Show the answer
A · True
A die is a tool used to cut external threads, such as on bolts or rods.
Study it properly — free, in the app
The full Veda Bites deck, complete notes, spaced-repetition flashcards, leveled MCQs, tests and games for this kit — plus Daily Facts and the Arena, every day.